STA-1200C-TSSG-III is a 3-zone top seed solution growth (TSSG) furnace for growing various crystals via flux solution. The furnace consists of three heating zone with the chamber of 5" Diameter x 24" high up to 1200º C. In the TSSG method of SiC, solid Si is heated and melted in the graphite crucible by the induction-heating coils. The needed carbon dissolves from the crucible into the Si melt, then forms a dilute Si-C solution (melt).
Specifications：
Furnace | l Three heating zone: 150mm+300mm+150mm with independent temperature control, which is easy to create the thermal gradient. l Max. Working Temperature: 1200ºC (< 60 minute) l Standard Working Temperature: 1100ºC (continuous) l Power: 208V- 240V AC, 50/50Hz, Single phase l 5000W Max. |
Control Panel | l PLC touch screen control panel for controlling temperature, pulling speed, rapid downward speed and rotation speed of pulling rod l Temp. Controller: 8 steps programmable and auto PID control with +/- 0.1ºC accuracy (Eurotherm inside) l Heating Rate：0~10ºC / min (suggestion at =< 5ºC) l Pulling Speed: 0.8-50mm/h adjustable l Downward speed: 40 mm/minute fixed l The rotation speed of the Pulling rod: 0.1-23 RPM adjustable |
Pulling Range | l 300 mm Max. |
Heating Chamber | l 135 m Dia Splittable with max. 80 mm crucible without sealed tube l 600 mm in Height l Kathal-resistant heating coil l 5 pcs K type thermal couple l Optional |
Temperature Controller | l Built-in five Eurotherm Temperature Controllers with +/- 0.1ºC accuracy l 24 segment programmable l PC control software is included |
Warranty | l One-year limited warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty.) |
Specifications：
Furnace | l Three heating zone: 150mm+300mm+150mm with independent temperature control, which is easy to create the thermal gradient. l Max. Working Temperature: 1200ºC (< 60 minute) l Standard Working Temperature: 1100ºC (continuous) l Power: 208V- 240V AC, 50/50Hz, Single phase l 5000W Max. |
Control Panel | l PLC touch screen control panel for controlling temperature, pulling speed, rapid downward speed and rotation speed of pulling rod l Temp. Controller: 8 steps programmable and auto PID control with +/- 0.1ºC accuracy (Eurotherm inside) l Heating Rate：0~10ºC / min (suggestion at =< 5ºC) l Pulling Speed: 0.8-50mm/h adjustable l Downward speed: 40 mm/minute fixed l The rotation speed of the Pulling rod: 0.1-23 RPM adjustable |
Pulling Range | l 300 mm Max. |
Heating Chamber | l 135 m Dia Splittable with max. 80 mm crucible without sealed tube l 600 mm in Height l Kathal-resistant heating coil l 5 pcs K type thermal couple l Optional |
Temperature Controller | l Built-in five Eurotherm Temperature Controllers with +/- 0.1ºC accuracy l 24 segment programmable l PC control software is included |
Warranty | l One-year limited warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty.) |
