STATF-1800-60 high temperature vacuum tube furnace is a CE Certified compact tube furnace with a 60 mm dia. alumina processing tube and KANTHAL Super 1900 Grade MoSi2 heating elements. It is widely used in material & chemical researching labs to sinter all types of new material samples under vacuum and other gas conditions. The temperature of STATF-1800-60 tube furnace is controlled by a 30 segment programmable high precision SCR (Silicon Controlled Rectifier) digital controller with accuracy of +/-1 C. This tube furnace has a max. working temperature up to 1750ºC.
STATF-1800-60 laboratory tube furnace is real high temperature furnace with up to 1700°C with for max energy saving. It is an ideal tool for preparing new generation material in research laboratory, materials annealing and sintering, composition analysis, quality testing, etc.
Model | STATF-1800-60 |
Furnace structure | Double layer steel casing with air cooling. Two cooling fans inside to keep case temperature < 60C. High purity Alumina refractory chamber with max energy saving. Alumina tube, vacuum flanges, gauge & valves are included. Compact design |
Power | Max. 5KW (30A fuse required) |
Voltage | Single Phase, 220V AC, 50/60 Hz (30A breaker required) |
Max. Working Temperature | 1750ºC (< 1 hour) |
Continuous Working Temperature | 800~1720ºC |
Max. Heating / Cooling Rate | 10ºC / min |
Heating Zone | 200 mm (8") |
temperature accuracy | +/- 1 ºC. |
Constant Temperature Zone | 50 mm (2") within ± 2° |
Heating Elements | KANTHAL Super 1900 MoSi2 heating element |
Temperature Controller | PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. 30 programmable segments for precise control of heating rate, cooling rate and dwell time. Built-in over temperature alarm and protection allows for operation without attendant. |
Premium Grade Alumina Tube | High purity Al2O3 ceramic, Purity > 99.9%. 50 mm (I.D) x 60 mm (O.D) x 800 mm length. Two fiberous ceramic tube blocks are included for blocking heat radiation from inside tube (Ceramic blocks must be fully inserted into the furnace chamber before heating). Quartz blocks (optional) are ideal for cleaner processing enviroment and higher vacuum efficiency. For 60mm tubes, it is recommended that customers purchase two pairs of tube support to prevent tube from bending under high temperature |
Sealing Flanges | One pair of sealing flanges with double silicone high temperature O-rings is included. Two SS needle valves and one dial vacuum gauge are installed on flanges for immediate us. |
Fitting Ports | Standard 1/4‘’ Barbed fittings with needle valves. For supplying high pressure gas, you may replace the standard barbed hose fitting with the 304SS 1/4" Tube Fitting, please click underlined to order. |
Vacuum Level | Limited by vacuum pump 50 mtorr can be achieved by mechanical pump 10^-5 torr can be reached by molecular pump Vacuum pump is not included, please order separately at related products section |
Power Cable & Plug | 10 feet length 10-3 AWG heavy duty UL approven power cable is included. Extra length cable can be ordered by click picture below-left Plug is not included. You can order from your local haedware store according to female plug in your lab, or order from link below-right (30A plug) |
Dimensions | 445 L x 380 W x 615 H mm |
Net Weight | 150Kg |
Shipping Dimensions | 38"x 38"x 38" |
Shipping Weight | 400 lbs |
Warranty | One year limited manufacture warranty with life time support (consumable parts such as furnace liner, processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below). |
Compliance | CE Certified UL / MET / CSA Certification is available upon request, additional charges will apply Temperature controller is MET and CE Certified Transformer is UL Certified |
Application Notes | Vacuum pressures may only be safely used up to 1500°C The tube furnaces with alumina tube are designed for using under vacuum and low pressure < 0.12 MPa (absolute pressure) |
STANDARD SIZE OF LABORATORY VACUUM TUBE FURNACE, TEMPERATURE FROM 1200 TO 1800 DEG C.
Specs Model | MAX Temperature (℃) | Operating Temperature (℃) | Diameter Furnace tube (mm) | Length of Heating zone (mm) | Tube Length
(mm) |
STATF-1200X |
1200℃ |
≦1100℃ | 25 / 40 / 50 / 60 / 80 / 100 / 120 | 100 / 200 / 300 / 400 / 500 / 600 | 600 / 800 / 1000 / 1200 / 1500 |
STATF-1400X |
1400℃ |
≦1350℃ | 25 / 40 / 50 / 60 / 80 / 100 / 120 | 100 / 200 / 300 / 400 / 500 / 600 | 600 / 800 / 1000 / 1200 / 1500 |
STATF-1700X |
1700℃ |
≦1650℃ | 25 / 40 / 50 / 60 / 80 / 100 / 120 | 100 / 200 / 300 / 400 / 500 / 600 | 600 / 800 / 1000 / 1200 / 1500 |
STATF-1800X |
1750℃ |
≦1720℃ | 25 / 40 / 50 / 60 / 80 / 100 / 120 | 100 / 200 / 300 / 400 / 500 / 600 | 600 / 800 / 1000 / 1200 / 1500 |
STA laboratory furnace Standard features STATF-1800-60 high temperature vacuum laboratory tube furnace
l 1750°C maximum operating temperature.
l Diameter of tube From 25 to 200 mm capacities.
l KANTHAL SUPER 1900 MoSi2 heating elements.
l Importing high purity alumina zirconia fiber.
l PID automatic control via current limiting phase angle fired the resistor, e.g. SC R(Silicon Controlled Rectifier).
l Power control with 30 segments programmable 708P controller
l Over-temperature protection
l Fan cooling for low external case temperature
l touch screen temperature controller (Option)
l Digital RS232 communications (Option):
STATF-1800-60 high temperature vacuum tube furnace is a CE Certified compact tube furnace with a 60 mm dia. alumina processing tube and KANTHAL Super 1900 Grade MoSi2 heating elements. It is widely used in material & chemical researching labs to sinter all types of new material samples under vacuum and other gas conditions. The temperature of STATF-1800-60 tube furnace is controlled by a 30 segment programmable high precision SCR (Silicon Controlled Rectifier) digital controller with accuracy of +/-1 C. This tube furnace has a max. working temperature up to 1750ºC.
STATF-1800-60 laboratory tube furnace is real high temperature furnace with up to 1700°C with for max energy saving. It is an ideal tool for preparing new generation material in research laboratory, materials annealing and sintering, composition analysis, quality testing, etc.
Model | STATF-1800-60 |
Furnace structure | Double layer steel casing with air cooling. Two cooling fans inside to keep case temperature < 60C. High purity Alumina refractory chamber with max energy saving. Alumina tube, vacuum flanges, gauge & valves are included. Compact design |
Power | Max. 5KW (30A fuse required) |
Voltage | Single Phase, 220V AC, 50/60 Hz (30A breaker required) |
Max. Working Temperature | 1750ºC (< 1 hour) |
Continuous Working Temperature | 800~1720ºC |
Max. Heating / Cooling Rate | 10ºC / min |
Heating Zone | 200 mm (8") |
temperature accuracy | +/- 1 ºC. |
Constant Temperature Zone | 50 mm (2") within ± 2° |
Heating Elements | KANTHAL Super 1900 MoSi2 heating element |
Temperature Controller | PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. 30 programmable segments for precise control of heating rate, cooling rate and dwell time. Built-in over temperature alarm and protection allows for operation without attendant. |
Premium Grade Alumina Tube | High purity Al2O3 ceramic, Purity > 99.9%. 50 mm (I.D) x 60 mm (O.D) x 800 mm length. Two fiberous ceramic tube blocks are included for blocking heat radiation from inside tube (Ceramic blocks must be fully inserted into the furnace chamber before heating). Quartz blocks (optional) are ideal for cleaner processing enviroment and higher vacuum efficiency. For 60mm tubes, it is recommended that customers purchase two pairs of tube support to prevent tube from bending under high temperature |
Sealing Flanges | One pair of sealing flanges with double silicone high temperature O-rings is included. Two SS needle valves and one dial vacuum gauge are installed on flanges for immediate us. |
Fitting Ports | Standard 1/4‘’ Barbed fittings with needle valves. For supplying high pressure gas, you may replace the standard barbed hose fitting with the 304SS 1/4" Tube Fitting, please click underlined to order. |
Vacuum Level | Limited by vacuum pump 50 mtorr can be achieved by mechanical pump 10^-5 torr can be reached by molecular pump Vacuum pump is not included, please order separately at related products section |
Power Cable & Plug | 10 feet length 10-3 AWG heavy duty UL approven power cable is included. Extra length cable can be ordered by click picture below-left Plug is not included. You can order from your local haedware store according to female plug in your lab, or order from link below-right (30A plug) |
Dimensions | 445 L x 380 W x 615 H mm |
Net Weight | 150Kg |
Shipping Dimensions | 38"x 38"x 38" |
Shipping Weight | 400 lbs |
Warranty | One year limited manufacture warranty with life time support (consumable parts such as furnace liner, processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below). |
Compliance | CE Certified UL / MET / CSA Certification is available upon request, additional charges will apply Temperature controller is MET and CE Certified Transformer is UL Certified |
Application Notes | Vacuum pressures may only be safely used up to 1500°C The tube furnaces with alumina tube are designed for using under vacuum and low pressure < 0.12 MPa (absolute pressure) |
STANDARD SIZE OF LABORATORY VACUUM TUBE FURNACE, TEMPERATURE FROM 1200 TO 1800 DEG C.
Specs Model | MAX Temperature (℃) | Operating Temperature (℃) | Diameter Furnace tube (mm) | Length of Heating zone (mm) | Tube Length
(mm) |
STATF-1200X |
1200℃ |
≦1100℃ | 25 / 40 / 50 / 60 / 80 / 100 / 120 | 100 / 200 / 300 / 400 / 500 / 600 | 600 / 800 / 1000 / 1200 / 1500 |
STATF-1400X |
1400℃ |
≦1350℃ | 25 / 40 / 50 / 60 / 80 / 100 / 120 | 100 / 200 / 300 / 400 / 500 / 600 | 600 / 800 / 1000 / 1200 / 1500 |
STATF-1700X |
1700℃ |
≦1650℃ | 25 / 40 / 50 / 60 / 80 / 100 / 120 | 100 / 200 / 300 / 400 / 500 / 600 | 600 / 800 / 1000 / 1200 / 1500 |
STATF-1800X |
1750℃ |
≦1720℃ | 25 / 40 / 50 / 60 / 80 / 100 / 120 | 100 / 200 / 300 / 400 / 500 / 600 | 600 / 800 / 1000 / 1200 / 1500 |
STA laboratory furnace Standard features STATF-1800-60 high temperature vacuum laboratory tube furnace
l 1750°C maximum operating temperature.
l Diameter of tube From 25 to 200 mm capacities.
l KANTHAL SUPER 1900 MoSi2 heating elements.
l Importing high purity alumina zirconia fiber.
l PID automatic control via current limiting phase angle fired the resistor, e.g. SC R(Silicon Controlled Rectifier).
l Power control with 30 segments programmable 708P controller
l Over-temperature protection
l Fan cooling for low external case temperature
l touch screen temperature controller (Option)
l Digital RS232 communications (Option):