Vacuum Sintering Furnace
Maximum Temperature:
2000℃ (3632℉)
Hot Zone Dimensions:
14.625” high x 14.25” wide x 28” deep element-to-element (925px x 900px x 1800px)
External Dimensions:
Approximately 75” high x 64” wide x 68” deep (4750px x 4075px x 4325px)
Power Requirements:
480 volts, 3 phase, 60 hertz
Atmosphere:
Rough vacuum operation
Partial pressure operation
Atmosphere operation with argon or nitrogen
Features:
Digital programmable temperature controller with 30 programs and 300 segments.
Fully automatic operation with PLC programmer/controller with alphanumeric display to indicate furnace processing cycles.
Dual Type “C” thermocouple. (Optional thermocouple retractor system.)
Graphite hot zone.
Graphite heating elements.
Mechanical vacuum pump.
Digital vacuum gauge capable of reading argon or nitrogen (not gas-sensitive).
Digital high limit controller.
We provide written operating procedures, complete detailed electrical schematics, and manuals for all instrumentation and controls on the furnace.
Options:
Thermocouple retractor system with optical pyrometer with a temperature range of 1000-3000℃(1832-5432℉).
5 micron particulate filter in front of the pumps with an easily-replaceable cartridge.
Bubbler on the process gas exhaust line to minimize air/water vapor back streaming during atmosphere operation.
6-channel paperless datalogging chart recorder with digital communications. Network compatible – can appear as a node on a network, making remote data gathering fast and easy. It can be programmed to email alarms to you. Includes built-in memory card for storage.
Vacuum Sintering Furnace
Maximum Temperature:
2000℃ (3632℉)
Hot Zone Dimensions:
14.625” high x 14.25” wide x 28” deep element-to-element (925px x 900px x 1800px)
External Dimensions:
Approximately 75” high x 64” wide x 68” deep (4750px x 4075px x 4325px)
Power Requirements:
480 volts, 3 phase, 60 hertz
Atmosphere:
Rough vacuum operation
Partial pressure operation
Atmosphere operation with argon or nitrogen
Features:
Digital programmable temperature controller with 30 programs and 300 segments.
Fully automatic operation with PLC programmer/controller with alphanumeric display to indicate furnace processing cycles.
Dual Type “C” thermocouple. (Optional thermocouple retractor system.)
Graphite hot zone.
Graphite heating elements.
Mechanical vacuum pump.
Digital vacuum gauge capable of reading argon or nitrogen (not gas-sensitive).
Digital high limit controller.
We provide written operating procedures, complete detailed electrical schematics, and manuals for all instrumentation and controls on the furnace.
Options:
Thermocouple retractor system with optical pyrometer with a temperature range of 1000-3000℃(1832-5432℉).
5 micron particulate filter in front of the pumps with an easily-replaceable cartridge.
Bubbler on the process gas exhaust line to minimize air/water vapor back streaming during atmosphere operation.
6-channel paperless datalogging chart recorder with digital communications. Network compatible – can appear as a node on a network, making remote data gathering fast and easy. It can be programmed to email alarms to you. Includes built-in memory card for storage.
