Superthal MoSi2 heating flat panels are special ceramic fiber heater, and heated by MoSi2 heating elements with the straight or 90° bent with fixed contacts. Superthal flat panels are designed for horizontal use in high temperature furnace as heating module.
The superthal MoSi2 heating flat panels are special ceramic fiber heater, and heated by MoSi2 heating elements with the terminals either straight or 90° bent with fixed contacts. Superthal flat panels are designed for horizontal use in high temperature furnace as heating module.
The MoSi2 heating module are commonly used in the glass industry as overhead heaters of feeder forehearths. The panels consist of molybdenum disilicide MoSi2 heating elements integrated into reinforced ceramic fiber. The dimensions and MoSi2 heating element layout on each panel are specially designed. STA can give detailed technical advice on design and installation. Installation is very simple and takes normally 1–2 days for a feeder.
The MoSi2 heating flat panels assemblies offer exceptional surface loading capacity, offer overall power densities that are orders of magnitude greater than commercially available MoSi2 heating elements technologies and provide thermal outputs of up to 1300 deg C. These Superthal flat panels in many cases are designed for site line voltage, eliminating the need for transformer coupled electrical infrastructures. Improved life cycle and aging properties and self-contained assembly designs allow for individual element replacements without a complete equipment line shutdown and no post commissioning, resistance balancing requirements throughout the life-cycle of the element.
For the application of Superthal flat panels, here is a reference case for you. Please check it.
The superthal MoSi2 heating flat panels are special ceramic fiber heater, and heated by MoSi2 heating elements with the terminals either straight or 90° bent with fixed contacts. Superthal flat panels are designed for horizontal use in high temperature furnace as heating module.
The MoSi2 heating module are commonly used in the glass industry as overhead heaters of feeder forehearths. The panels consist of molybdenum disilicide MoSi2 heating elements integrated into reinforced ceramic fiber. The dimensions and MoSi2 heating element layout on each panel are specially designed. STA can give detailed technical advice on design and installation. Installation is very simple and takes normally 1–2 days for a feeder.
The MoSi2 heating flat panels assemblies offer exceptional surface loading capacity, offer overall power densities that are orders of magnitude greater than commercially available MoSi2 heating elements technologies and provide thermal outputs of up to 1300 deg C. These Superthal flat panels in many cases are designed for site line voltage, eliminating the need for transformer coupled electrical infrastructures. Improved life cycle and aging properties and self-contained assembly designs allow for individual element replacements without a complete equipment line shutdown and no post commissioning, resistance balancing requirements throughout the life-cycle of the element.
For the application of Superthal flat panels, here is a reference case for you. Please check it.
